VCHUNG 10GBASE-EZR 100KM SFP+ module is designed for use with Different equipment and is equivalent to genuine part number SFP-10G-EZR100. It supports data-rate of 10.3125Gbps (10GBASE-EZR), providing 10-Gigabit connectivity for up to 100km over single-mode fiber cable. This SFP+ module is programmed and tested at the factory, to ensure it works with Various Networking 10G Ethernet Switches, Routers, and other network equipment. It provides a low-cost replacement to OEM transceivers and delivering a compatible transceiver solution for 10G fiber cabling needs.
1.10Gb/s serial optical interface compliant to 802.3ae 10GBASE-EZR/ZW 100KM
2.Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module “SFP+”
3.1550nm cooled EML transmitter with TEC, APD photo-detector
4.2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
5.Operating case temperature: 0 to 70 °C
6.All-metal housing for superior EMI performance
7.Low power consumption, less than1.5 w
8.Advanced firmware allow customer system encryption information to be stored in transceiver
9.Cost effective SFP+ solution, enables higher port densities and greater bandwidth
2.10G Fiber Channel
3.10GE Data Center Switches and Routers
4.10GE Network interface cards and Fiber Media Converters
|Form Factor||SFP+||Data Rate||10Gbps|
|Media||Single-mode||Device Type||SFP+ EZR|
|Connector Type||Duplex LC||DDMI||with|
|Optical Components||EML 1550nm||Power Supply Voltage||3.3V|
|Output Power||0~4dBm||Receiver Sensitivity||< -25dBm|
|Compatiblity||MSA Compliant||Operating Temperature||0℃ to +70℃|
|Optical transceivers port(LC) |
For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors).
Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals.
|Optical transceivers series|
Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface.
Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including:
1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC.
2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP.
3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4.
The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market.
Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied.
|Industrial Standards |
VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process.
|Full MSA Compliance |
High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally.
VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service.