For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax Cable

Quick Details
Part number: SFP-H10GB-CUxxM-VC Connector Type: SFP+ to SFP+
Passive or actively equalized: Passive Cable length:0.5M ~10M
Data Rate: 10.5Gb/s  Cable Type:Twinax (DAC ) cable

Model Number: #17101 Category:

Brief Introduction

SFP-H10GB-CUxxM -VC The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability. These assemblies are called “passive” copper cables because there isn’t any signal conditioning circuitry (e.g. crosstalk or echo cancellation) contained within the SFP+ connector. Sometimes these assemblies are referred to as “DAC” or “Direct Attached Copper” cables. Inside the SFP+ MSA footprint optical cables can be used that require optical transceivers or Active Optical Cables (AOC) that contain the transceiver as part of the cable.

Features

1.Support for multi-gigabit data rates up to 10.5Gbps
2.850nm VCSEL transmitter, PIN photo-detector receiver, up to 300m on OM3 MMF
4. Wire AWG: AWG30, AWG28, AWG26, AWG24
5.Cable type: Passive Copper Twinax Cable
6.Available length (in meters): 1, 2, 3…… • Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC performance
7.Commercial temperature range (COM): 0~ 70 °C
8.Low power consumption < 0.5W 10.Power supply :+3.3V 11.Small diameter cable design 12.Compatible to SFP+ MSA 13.Electrical interface compliant to SFF-8431 Applications

1.High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
2.Switched fabric I/O such as ultra high bandwidth switches and routers
3.Data center cabling infrastructure
4.High density connections between networking equipment

Specifications

OEM Part Number SFP-H10GB-CUxxM-VC   Form Factor SFP+ DAC Cable
Connector Type SFP+ to SFP+ Cable Type Twinax
Passive or actively equalized Passive Data Rate 10.5Gb/s
Cable length 0.5M to 10M available,support custom length Wire Gauge 30AWG
Power Supply Voltage 3.3V Jacket Material PVC(OFNR)
Minimum cable bend radius 25 mm Cable impedance 100 Ω
Protocols 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel Operating Temperature 0℃ to +70℃

For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax CableOptical transceivers port(LC)

For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors).
Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals.

Optical transceivers series

Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface.
Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including:
1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC.
2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP.
3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4.
For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax Cable

Compatibility

The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market.
Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied.
For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax Cable

For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax CableIndustrial Standards

VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process.

For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax CableFull MSA Compliance

High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally.

Quality assurance

VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service.
For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax Cable

 

10GBASE-LR SFP+ DATASHEET

10GBASE-LR SFP+ DATASHEET

For Cisco SFP-H10GB-CUxxM Compatible Direct Attach Cable(DAC) 10G SFP+ Passive Direct Attach Copper Twinax Cable

This drawing is for reference only. If you need more information and need to modify the drawing, please Email us:support@vchung.com

Q1. What is your terms of packing?

Answer: A: Generally, we pack our goods in ziplock bag and brown cartons. If you have special requirements, please let us know and we will try our best to cooperate with you.

Q2. What is your terms of payment?

Answer: A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?

Answer: A: EXW, FAS, FOB, FCA, CFR, CPT, CIF, CIP.

Q4. How about your delivery time?

Answer: A: Generally, it will take 2 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?

Answer: A: Yes, we can produce by your samples or technical drawings.

Q6. What is your sample policy?

Answer: A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?

Answer: A: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

Answer: A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Get A Free Product Quote

Simply fill in your requirement below to get your free, no obligation quotation today!
Your inquiry will be replied within 12 hours, and we respect your privacy.

Contact Us

Email Us: Just email us and we will review it carefully and get you a response in 12 hours. 

Orders

sales@vchung.com

Inquire about our product information and service details before ordering.

Technical Support

tech@vchung.com

Resolve technical uncertainties and we will give a full analysis and resolve it.

Call Us

Tel & Fax: +86-755-81481899

This is an English language line and there will be a salesperson to communicate with you.

Skype Chat

Skype ID: gamvinhuang

Add gamvinhuang as a friend, then feel free to chat with us on skype.

Scroll to Top

Product Inquiry