Brief Introduction
This Brocade 57-0000088-01 compatible part is a small form factor pluggable SFP+ shortwave transceiver for 16G Fibre Channel (16GFC) applications. It supports links up to 100m over OM3 multimode fiber. This module features a highly reliable 850nm VCSEL transmitter and PIN photo-detector into a duplex LC optical connector. It is a multi-rated 850nm optical transceiver that supports 14.025/8.5/4.25G Fibre Channel specifications. This compatible 57-0000088-01 complies with Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) SFF-8431 Rev. 4.1 and SFF-8472 Rev. 11.0. It has been programmed to ensure works with Brocade 16G SAN switches, routers, network interface cards (NICs) and other storage networking equipment.
Features
1. Up to 14.025Gb/s bi-directional data links
2. Optical interface compliant to IEEE 802.3ae
3. Electrical interface compliant to SFF-8431
4. Hot Pluggable SFP+ footprint
5. 850nm VCSEL transmitter, PIN photo-detector
6. Built-in CDR with shut-off control
7. Single +3.3V power supply
8. Advanced firmware allow customer system
9. Cost effective SFP+ solution enables higher port densities and greater bandwidth
10. RoHS compliant and Lead-free
Applications
1.High-speed storage area networks
2. Switches and hubs
3. Network interface cards −
4.Mass storage systems −
5.Host bus adapters
6.Tri-Rate 4G/8G/16G Fibre Channel
Specifications
| Form Factor | 16G SFP+ | Data Rate | 10Gbps |
| Wavelength | 850nm | Reach | 100m |
| Media | Multi-mode | Device Type | 16G SFP+ SW |
| Connector Type | Duplex LC | DDMI | with |
| Optical Components | VCSEL + PIN | Power Supply Voltage | 3.3V |
| Output Power | -6~-1dBm | Receiver Sensitivity | ＜ -11.1dbm |
| Compatiblity | MSA Compliant | Operating Temperature | 0℃ to +70℃ |
 | Optical transceivers port(LC) For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors). Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals. |
| Optical transceivers series Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface. Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including: 1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC. 2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP. 3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4. |  |
| Compatibility The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market. Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied. |  |
 | Industrial Standards VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process. |
 | Full MSA Compliance High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally. |
| Quality assurance VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service. |  |
