Brief Introduction
The QSFP-100G-AOCxxM-VC is a This is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ AOC for 100 Gigabit Ethernet and Infiniband EDR Applications. This AOC is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25.78125 Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates HTD proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features
1.4 channels full-duplex transceiver modules
2. Supports 100Gbps total data rate
3. Transmission data rate up to 28.05Gbps per channel
4. 4 channels 850nm VCSEL array
5. 4 channels PIN photo detector array
6. Low power consumption <3.5W
7. Hot Pluggable QSFP form factor
8. Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
9. Single MPO connector receptacle
10. Built-in digital diagnostic functions
11. Operating case temperature 0°C to +70°C
12. 3.3V power supply voltage
13. RoHS 6 compliant(lead free)
Applications
2. 40G to 4×10G density applications for Datacom and Proprietary protocol applications
3. Datacenter
Specifications
OEM Part Number | QSFP-100G-AOCxxM-VC | Form Factor | QSFP28 AOC |
Connector Type | QSFP28 to QSFP28 | Device Type | Active |
Wavelength | 850nm | Max Data Rate | 100Gb/s |
Cable length | 1M to 100M | Fiber Cable | OM3 MMF |
Power Supply Voltage | 3.3V | Cable Jacket Type | LSZH |
Minimum cable bend radius | 7.5mm | Operating Temperature | 0℃ to +70℃ |
Protocols | 40G/100G Ethernet, Infiniband EDR |
![]() | Optical transceivers port(LC) For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors). Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals. |
Optical transceivers series Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface. Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including: 1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC. 2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP. 3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4. | ![]() |
Compatibility The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market. Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied. | ![]() |
![]() | Industrial Standards VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process. |
![]() | Full MSA Compliance High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally. |
Quality assurance VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service. | ![]() |