Brief Introduction
The SFP+ passive cable assemblies are high performance, cost effective I/O solutions for 10G Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability. These assemblies are called “passive” copper cables because there isn’t any signal conditioning circuitry (e.g. crosstalk or echo cancellation) contained within the SFP+ connector. Sometimes these assemblies are referred to as “DAC” or “Direct Attached Copper” cables. Inside the SFP+ MSA footprint optical cables can be used that require optical transceivers or Active Optical Cables (AOC) that contain the transceiver as part of the cable.
Features
1.Support for multi-gigabit data rates up to 10.5Gbps
2.850nm VCSEL transmitter, PIN photo-detector receiver, up to 300m on OM3 MMF
4. Wire AWG: AWG30, AWG28, AWG26, AWG24
5.Cable type: Passive Copper Twinax Cable
6.Available length (in meters): 1, 2, 3…… • Improved Pluggable Form Factor (IPF) compliant for enhanced EMI/EMC performance
7.Commercial temperature range (COM): 0~ 70 °C
8.Low power consumption < 0.5W 10.Power supply :+3.3V 11.Small diameter cable design 12.Compatible to SFP+ MSA 13.Electrical interface compliant to SFF-8431 Applications
1.High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
2.Switched fabric I/O such as ultra high bandwidth switches and routers
3.Data center cabling infrastructure
4.High density connections between networking equipment
Specifications
| OEM Part Number | SFP-H10GB-CUxxM | Form Factor | SFP+ DAC Cable |
| Connector Type | SFP+ to SFP+ | Cable Type | Twinax |
| Passive or actively equalized | Passive | Data Rate | 10.5Gb/s |
| Cable length | 0.5M to 10M available,support custom length | Wire Gauge | 30AWG |
| Power Supply Voltage | 3.3V | Jacket Material | PVC(OFNR) |
| Minimum cable bend radius | 25 mm | Cable impedance | 100 Ω |
| Protocols | 1x InfiniBand QDR, DDR, SDR, 10G Gigabit Ethernet, Fibre Channel | Operating Temperature | 0℃ to +70℃ |
 | Optical transceivers port(LC) For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors). Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals. |
| Optical transceivers series Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface. Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including: 1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC. 2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP. 3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4. |  |
| Compatibility The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market. Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied. |  |
 | Industrial Standards VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process. |
 | Full MSA Compliance High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally. |
| Quality assurance VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service. |  |
