400G OSFP SR8 850nm 100M MPO-16 MMF Transceivers

Brief Introduction

Vchung 400Gb/s OSFP optical module, It provides increased port density and total system cost savings. The OSFP full-duplex optical module offers 8 independent transmit and receive channels, each capable of 53.125Gb/s operation for an aggregate data rate of 400Gb/s on 100 meters of OM3 multi-mode fiber. An optical fiber cable with an MTP/MPO-16 connector can be plugged into the OSFP SR8 module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through an OSFP MSA-compliant edge type connector. The central wavelengths of all the 8 parallel lanes are 850nm. It contains an optical MPO-16 connector for the optical interface and a 60-pin connector for the electrical interface. Host FEC is required to support up to 100m OM3 multi-mode fiber transmission. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the OSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.

Features

OSFP MSA compliant
8 parallel lanes on 850nm center wavelength
Compliant to IEEE 802.3bs Specification
Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC
Operating case temperature: 0 to 70°C
125Gb/s electrical interface (400GAUI-8)
Data Rate 53.125Gbps (PAM4) per channel.
Maximum power consumption 12W
MPO-16 connector
RoHS compliant

Applications

Data Center Interconnect
400G Ethernet
Infiniband Interconnects

Specifications

Part No.	VC-OSFP-400G-SR8	Form Factor	OSFP Finned Top
Distance	100m on OM3	Wavelength	850nm
Operation Temperature	0 to 70°C (32 to 158°F)	Connector	MTP/MPO-16 (APC)
Voltage	3.3V	Cable Type	MMF
Extinction Ratio	3dB	Transmitter Type	850nm VCSEL
Receiver Type	PIN	TX Power	-6.0~+4.0dBm
Receiver Sensitivity	< -7.0 dBm	Data Rate	400G/ps
Power Consumption	< 12W	Modulation Format	8x 50G PAM4
Host Required	FEC	Application	400G Ethernet, Data Center Interconnect, Infiniband Interconnects, Enterprise Networking
DDM/DOM	Yes	Protocols	OSFP MSA, IEEE 802.3bs

OSFP-400G-SR8 400G OSFP SR8 850nm 100M MPO-16 MMF Transceivers

Optical transceivers port(LC)

For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors).
Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals.

Optical transceivers series

Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface.
Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including:
1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC.
2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP.
3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4.

Compatibility

The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market.
Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied.

Industrial Standards

VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process.

Full MSA Compliance

High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally.

Quality assurance

VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service.

This drawing is for reference only. If you need more information and need to modify the drawing, please Email us：support@vchung.com

Q1. What is your terms of packing?

Answer: A: Generally, we pack our goods in ziplock bag and brown cartons. If you have special requirements, please let us know and we will try our best to cooperate with you.

Q2. What is your terms of payment?

Answer: A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. What is your terms of delivery?

Answer: A: EXW, FAS, FOB, FCA, CFR, CPT, CIF, CIP.

Q4. How about your delivery time?

Answer: A: Generally, it will take 2 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Can you produce according to the samples?

Answer: A: Yes, we can produce by your samples or technical drawings.

Q6. What is your sample policy?

Answer: A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q7. Do you test all your goods before delivery?

Answer: A: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

Answer: A:1. We keep good quality and competitive price to ensure our customers benefit ; 2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Part number: VC-OSFP-400G-SR8	Connector Type: MTP/MPO-16 (APC)
Form Factor:OSFP Finned Top	Wavelength: 850nm
Distance:100m	Fiber Type：MMF