Brief Introduction
The Vchung 100Gbase DR1 is designed for using in 100-Gigabit Ethernet links up to 500m over Single-Mode Fiber (SMF). It is compliant withthe QSFP28 MSA , 802.3cu-2021 and CAUI-4(no FEC)1
Digital diagnostics functions are availableviatheI2Cinterface, as specified by the QSFP28 MSA. The module incorporates 1 channel optical signal, on 1311nm center wavelength, operating at 100Gbpsdatarate. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 1 channel of 100Gbps(PAM4)optical signal, and also can convert 1 channel of 100Gbps (PAM4) optical signal to 4 channels of 25Gbps(NRZ)electrical output data. The electrical interface uses a 38-contact edge type connector. The optical interfaceusesa Duplex LC connector. The high performance cooled EML transmitter and high sensitivity PINreceiver providesuperior performance for 100Gigabit Ethernet applications up to 500m links
Features
Compliant to 100G Lambda MSA 100G DR1
Full-duplex transceiver module
4×25.78125Gbps NRZ electrical interface(CAUI-4)
106.25Gbps PAM4 based on a cooled EML TOSA transmitter
106.25Gbps PAM4 PIN Receiver
4W maximum power dissipation
Hot-pluggable QSFP28 form factor
Maximum link length of 500m on G.652 SMF with KP-FEC
Duplex LC receptacles
Built-in digital diagnostic functions
Operating case temperature range: 0 to 70℃
Applications
- Data Center Interconnect
- 100G Ethernet
- Enterprise networking
Part No. | VC-QSFP28-100G-DR1 | Form Factor | QSFP28 |
Distance | 500m | Wavelength | 1310nm |
Operation Temperature | 0 to 70°C (32 to 158°F) | Connector | Duplex LC |
Voltage | 3.3V | Cable Type | SMF |
DDM | Yes | Transmitter Type | EML |
Receiver Type | PIN | TX Power | -2.4~+4.0dBm |
Receiver Sensitivity | <-4.4dBm | Protocols | QSFP28 MSA |
Warranty | 3 years | Data Rate | 100G/ps |
Optical transceivers port(LC) For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors). Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals. |
Optical transceivers series Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface. Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including: 1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC. 2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP. 3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4. |
Compatibility The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market. Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied. |
Industrial Standards VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process. |
Full MSA Compliance High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally. |
Quality assurance VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service. |