MMS4X00-NM-FLT NVIDIA Ethernet Compatible OSFP 800GBASE-DR8 Flat Top PAM4 1310nm 500m DOM Dual MPO-12/APC SMF Optical Transceiver

Brief Introduction

The Vchung VC-MMS4X00-NM-FLT is fully compatible with NVIDIA’s MMS4X00-NM-FLT. The OSFP transceiver module is designed for use in 800 Gigabit Ethernet links over 500m single-mode fiber. The module has 8 independent electrical input/output channels operating up to 106.25Gbps per channel. This transceiver consists of two transmitter/receiver units, with each operating on a set of wavelengths on the ITU G.694.2 CWDM at 1310nm. The transmitter path of the module incorporates a bi-directional PAM4 re-timer ASIC integrated with an EML laser and an 8-channel internal driver. On the receiver path, used 8 photodiodes and two 4-channel TIA arrays, along with the PAM4 re-timer.

Features

1. Up to 500m over SMF with KP4 FEC supported at the Host side
2. Dual MPO-12 connector
3. Triple Rate operation:
4. 25Gbps (PAM4)
5. 125Gbps (PAM4)
6. 5625Gbps (NRZ)
7. Silicon Photonics 1310nm transmitter
8. PIN and TIA array on the receiver side
9. Power dissipation < 18W
10. Case temperature range: 0°C to 70°C(commercial)

Applications

 

Part No.	VC-MMS4X00-NM-FLT	Form Factor	OSFP FLAT Top
Distance	500m	Wavelength	1310nm
Operation Temperature	0 to 70°C (32 to 158°F)	Connector	Dual MTP/MPO-12
Voltage	3.3V	Cable Type	SMF
Powerbudget	3dB	Transmitter Type	EML
Receiver Type	PIN	TX Power	-2.9~+4.0dBm
Receiver Sensitivity	< -5.9dBm	Max Data Rate	850Gbps (8x 106.25Gbps)
Inbuilt FEC	NO	Modulation Format	PAM4
Maximum Power	< 16.5W	DDM/DOM	Supported
CDR (Clock and Data Recovery)	TX & RX Built-in CDR	Extinction Ratio	＞3.5dB
Receiver Overload	5dBm	Protocols	OSFP MSA 5.0, CMIS 5.1

---

Optical transceivers port(LC) For LC port, there are two types of single-fiber bidirectional optical transceivers (one LC connector) and dual-fiber unidirectional optical transceiver (two LC connectors). Single fiber bidirectional is used to send and receive signals in one fiber, and dual fiber unidirectional optical transceivers are used to one fiber to send signals and other fiber to receive signals.

---

Optical transceivers series Vchung offer comprehensive optical modules, data rate from 155M to 100G,form factor including SFP,SFP+,XFP,SFP28,QSFP+,CFP,CFP2 and QSFP28,support MMF and SMF interface. Vchung closely follow optical communication market trend, offers comprehensive transceivers solution, including: 1. Data center:100G QSFP28, 40GQSFP+, 10G SFP+, 10G/25G/40G/100G AOC. 2. Transport (OTN,PTN):100G CFP/CFP2/CFP4, 10G SFP+/XFP BIDI/CWDM/DWDM/Tunable, SFP. 3. Wireless(5G fronthaul,middlehaul and backhaul):25G SFP28, 50G QSFP28 PAM4.

---

Compatibility The optical transceivers can be adapted to Cisco, Huawei, Huasan, Alcatel-Lucent, Juniper, Brocade, HPE, Extreme, Ericsson and other equipment. It is 100% compatible with all vendors on the market. Of course, before confirming the purchase, it is best to inform model of the equipment to which the optical transceivers is applied.

---

Industrial Standards VCHUNG all optical transceivers meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process.

---

Full MSA Compliance High availability optical transceivers meet the Multi Source Agreement (MSA) standard SFF-8431. With MSA Standards various manufacturers determine standardizations of the Transceiver to ensure the interoperability. The optical transceivers interface is defined electrically, mechanically and functionally.

---

Quality assurance VCHUNG provides OEM services, VCHUNG supply all optical modules are high quality and reliable optical transceivers. For quality assurance, we provide three years replacement and lifelong maintenance service.

---

 

 

This drawing is for reference only. If you need more information and need to modify the drawing, please Email us：support@vchung.com